Sharp TV Error Codes: An Ultimate Troubleshooting Guide to Fix It

Is your Sharp TV showing an error code while streaming content? Different error codes may appear on your screen for various reasons, pinpointing specific problems with your Sharp TV. However, you don’t need to worry because there are many ways to rectify these error codes. This article gives insight into error codes, including solutions and reasons for their occurrence on Sharp TVs.

Error Code and Solutions to Fix on Sharp TV

Error Code	Source of the Error Code	Ways to Resolve the Problem
Error Code 7	Slow Internet Connection	Try restarting your WiFi router.
Error Code 102	Unstable Network	Verify the stability of your internet connection.
Error Code 105	Slow Network Speed	Ensure your Sharp TV is connected to a reliable WiFi network. Consider changing the DNS server on your Sharp TV.
Error Code 106	TV Lost Internet Connection	Reconnect your Sharp TV to an alternate WiFi network. Consider updating the DNS server settings on your Sharp TV.
Error Code 109	Unreachable TV IP Address	Reboot your Sharp TV.
Error Code 137	YouTube App Error	Ensure your internet connection is stable, and try restarting your Sharp TV.
Error Code 201	Poor network connection Firmware issues	Update your Sharp TV software or connect the TV to a stable WiFi
Error Code 202	Failed to receive broadcast	Check the cable connection with the Antenna Rescan the channels
Error Code 324	Temporary Connectivity Issue	Ensure the internet is stable, and try restarting your Sharp TV.
Error Code 337	Streaming App or Network Issue	Restart your WiFi router or try reinstalling the streaming app.

Troubleshooting Methods for the Sharp TV Error Code

Here, we’ve provided in-depth explanations of the error codes and presented comprehensive workarounds to resolve each issue effectively.

Sharp TV Error Codes: 7, 102, and 201

When trying to access streaming apps on your Sharp TV, these error codes might surface, mainly because of inadequate internet connection. Other potential reasons include inaccurate WiFi credentials, compatibility problems with the apps and your Sharp TV, or technical glitches with your WiFi router.

Fixes to Resolve the Issue

• Confirm that your Sharp TV is properly connected to the internet and change the DNS Settings.
• Re-enter the correct WiFi credentials to reconnect your Sharp TV to the network.
• Ensure that the app is compatible with your Sharp TV.
• Clear the app cache on Sharp Smart TV.
• Update the app on your Sharp TV to the latest version.
• Uninstall and reinstall the app on your Sharp TV.
• Restart your WiFi router to troubleshoot connectivity issues.

Sharp TV Error Codes: 105, 324, 337, and 106

Error code 105 frequently occurs on Sharp TVs, displaying prompts such as “Check Network Connection.” This typically arises when attempting to access streaming apps without a stable network connection. Possible causes include technical issues with the WiFi router, temporary glitches in the TV system, outdated firmware, or server outages.

Fixes to Resolve the Issue

• Disconnect and reconnect your Sharp TV to a WiFi network.
• Restart your WiFi router to resolve any connectivity issues.
• Check the server status of the streaming app on the Downdetector website.
• The content or service may be geo-restricted. Use a VPN on Sharp TV to bypass the restrictions.
• Perform a restart of your Sharp Smart TV to address any software-related issues.

Sharp TV Error Code 109

When the IP address of your Sharp TV cannot be reached, error code 109 will be displayed, resulting in network connectivity problems that disrupt the TV’s functionality. This issue may arise when the internal media player of your Sharp TV encounters a malfunction.

Fixes to Resolve the Issue

• Verify the internet speed on your TV.
• Perform a reboot on your WiFi router.
• Switch your Sharp TV to another reliable network.
• Review your IP address settings.

Sharp TV Error Code: 137

It will typically arise when opening the YouTube application on a Sharp TV. When this error occurs, messages such as “Ads” or “No videos available” will display on the TV screen. The issue could originate from a server outage, an unresolved app cache, or an outdated YouTube application. Occasionally, it may result from connectivity problems with the TV’s network.

Fixes to Resolve the Issue

• Clear the cache of the YouTube app on your Sharp TV.
• Close the app forcibly on your Sharp TV and then relaunch it.
• Ensure you update the app on your Sharp TV.
• Remove and reinstall the YouTube application on your TV.
• Verify the network connection status on your TV.
• Upgrade your Sharp TV firmware to the latest version.

Sharp TV Error Code 202

The Sharp TV error code 202 occurs when there is an issue with the Antenna or signal reception. It may also occur if the cables are damaged or there is a problem with the Input. When this error code appears, you can’t watch the cable TV channels, and the screen will display a “No Signal” screen. You can easily troubleshoot this problem by following the solutions mentioned below.

Fixes to Resolve the Issue

• Position the Antenna in a place where you can get an uninterrupted signal.
• Manually perform the rescan of channels on your Sharp TV.
• If the Sharp TV firmware is outdated, make sure to update it to the latest version.
• Configure the input settings correctly and try to access the channels again.
• Reset the Sharp TV to factory settings and try again.

Other Common Solutions for Sharp TV Error Code

If you are unsure about the cause of the error, you can use the below troubleshooting methods to resolve the issue.

Check the Power Supply

A consistent power supply ensures uninterrupted content streaming, while voltage fluctuations pose significant problems. Faulty surge protectors commonly cause low voltage issues. To address this, disconnect the cable from the outlet and detach surge protectors from the power cord. Connect the TV to a different power outlet to find out whether it works. If the issue persists, proceed to the next troubleshooting method.

Check for the Connecting Cables of Sharp TV

Effective streaming on your TV heavily relies on the condition of the cables. However, if the connection becomes loose or damaged, it can result in the appearance of horizontal lines on the Sharp TV screen. It’s crucial to examine the cables thoroughly, especially if you’re using an external device for streaming content.

Begin by disconnecting the cables from the TV and inspecting them for any signs of damage. If you discover any issues with the cables, replace them with new ones promptly. Once the replacement is done, verify if the problem has been resolved. If the issue persists, proceed to explore the next solution.

Reassure the Sharp TV Inputs

Proper cable connections are vital for the functionality of your TV, just as ensuring correct input connections is crucial. Incorrectly connecting cables to TV inputs can result in functionality problems. To resolve this, ensure cables are connected to the appropriate TV inputs. If not, disconnect all cables, wait a few minutes, and reconnect them to the right ports on your Sharp TV. If the issue stays the same, try the next troubleshooting method.

Power Cycle Sharp TV

To address minor glitches associated with the power supply, performing a power cycle can effectively resolve the issue. This process involves shutting down your Sharp TV and discharging the residual power that was left on it.

Disconnect the power cord from your Sharp TV’s wall socket and keep it off for a few minutes. Hit the power button on your TV, typically positioned either at the bottom or rear of the device. Long-press the power button for approximately thirty seconds to drain any remaining power and initiate the power cycling process. After a short interval, reconnect the power cord and power on your Sharp TV.

In most cases, Sharp TV error codes will be solved. If not, proceed to the next workaround.

Uninstall Updates of the TV Apps

If you encounter any issues with your Sharp TV’s system apps, it’s essential to occasionally check them, even if there aren’t any immediate problems.

1. Start by powering on your Sharp TV using the Power button, then access the Home Screen.

2. Next, navigate to the Settings menu and locate the Apps section.

3. Within the Apps menu, scroll down until you find the System Apps category.

4. Choose the specific apps and uninstall any recent updates by selecting the Uninstall Updates option.

Restart Your WiFi Router

If your Sharp TV is having trouble connecting to the WiFi network, a recommended solution is to restart your WiFi router. To initiate this process, unplug the WiFi router’s cord from its power outlet. Allow several minutes to pass before plugging it back in, effectively rebooting the router.

After the router has restarted, proceed to reconnect it to your Sharp Smart TV to establish a connection and receive signals. Alternatively, consider changing the WiFi password before attempting to reconnect the TV for a quick solution.

This is how you can fix error codes and prevent them from occurring again. Our troubleshooting guide is more than enough to fix these error codes without seeking professional assistance. If there is a blinking light issue on your Sharp TV, it might indicate that there is a hardware problem. Without wasting time, contact Sharp TV customer service and follow their guidelines.

FAQ